Pressure Independent Dynamic Balance Picv Electric Control Valve

• Customization: Available
• Temperature: Ordinary Temperature
• Certification: ISO9001
• Model NO.: 8511
• Media: Water
• Standard: Standard
• Connection Mode: Internal Thread
• Power: Solenoid
• Material: Brass
• Type: Sleeve
• Transport Package: Panel
• Specification: DN20-DN32
• Trademark: WARCO
• Origin: China
• HS Code: 8481803990

Product Description

Specification
Design standard
Thread compliance:IS0228/1
Size range: 20 ~ 32mm(3/4" ~ 1-1/4")
Test standard: GB/T13927
Technical specification
Normal pressure:16bar
Size: DN20-DN32
Test pressure: shell 24bar
Seal 17.6bar
Medium temperature: 5 ºC ~ 100 ºC
Suitable content: cool,heating water or 50% ethylene glycol solution
Material specification:

No.	Parts name	material
1	Crown bar	SUS304
2	Baffle ring	SUS304
3	gasket	brass(CW617N)
4	Compass dial	SUS304
5	O ring	EPDM
6	Compress spring	SUS316
7	Screw sleeve	brass(CW617N)
8	Pass water pipe	brass(CW617N)
9	Position plate	SUS304
10	O ring	EPDM
11	body	brass(CW617N)
12	Adjustable screw sleeve	brass(CW617N)
13	Steel cable baffle ring	SUS304
14	O ring	brass(CW617N)
15	Press plate	EPDM
16	Rubber diaphragm	EPDM
17	Compress spring	SUS316
18	Sliding plate	brass(CW617N)
19	Seal plate	brass(CW617N)
20	O ring	EPDM
21	Plug/pressure nozzle	brass(CW617N)

Specification size:

DN	Mm	20	25	32
	inch	3/4	1	1-1/4
L		76	83	90
H		14.8
A		M30X1.5	M30X1.5	M30X1.5
N		16	20	23
D		φ14.5	φ14.5	φ14.5

Set	Flow(30kpa~300kpa)
	L/h	L/s
1	450	0.125
2	890	0.247
3	1250	0.347
4	1580	0.439
5	2020	0.561
6	2400	0.667

Installation note:

1. The actuator must be on a horizontal line.
2. do not use strength to drive when installation;
3. connected to the valve of the thread must be as the standard of national standard pipe thread;
4. before the installation of the valve and pipe should be kept clean, must not have sundry;
5. level suggested by the valve and pipeline installation, can be installed vertically, but shall not be inverted;
6. clear to ensure thermal insulation pipe and valve, actuator package may not be within the insulation layer. Note: if due to improper installation, working condition of damage caused by the medium is too bad, we only provide paid services.